This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi all,
im running 3phase MultiPlus-II 48/5000/70-48 and 6x Pylontech US3000c with a CerboGX.
Which Parameters should be expected to be visible on VRM? Is there a list available? Asking as i only get some few values.
Let me know if you need more input about setup or something else.
Best
Tobias
You should see all the parameters that you can see on the remote console tab for the battery. Advanced widgets should have a list when you try add them for the BMS.
Thanks for your reply.
Im asking as im wondering if the Battery pack is well balanced.
The SOC LEDs of each pack are very different, some are indicating 5 leds, others 2 and all between. So the gap is very high.
Wanted to know if theres an option to get all the cell voltages, min and max of the BMS status aren't indicating such a huge discrepancy, mostly only 0,01v difference.
All I've seen in the advanced widgets is min and max cell voltage. These show up under the BMS group.
Perhaps @Alexandra can shed more light.
