asked
MPPT 100/20
If you have an MPPT and a load on the same battery, that's exactly how it will work.
If you have 10A from your MPPT and an 8A load, the MPPT powers the load and sends the extra 2A to the battery (unless it's full). If you have 10A from your MPPT and an 12A load, the MPPT powers10A of the load and the battery powers 2A.
It can't work any other way.
Thanks for responding. What about the app settings? How is your setup? Mine isn't working and I admit I have played with the setting trying to get it to work. How do I reset it?
What voltage is your system and what is the load you're powering?
In Victron connect the "reset to defaults" is under settings, then the three dots in the top right.
A link to the load options if anyone is interested - https://www.victronenergy.com/media/pg/Manual_SmartSolar_MPPT_75-10_up_to_100-20/en/configuration-and-settings.html#UUID-e66362d1-a266-4b2d-4b64-2c478629c072
Jumper Settings
https://www.victronenergy.com/media/pg/Manual_SmartSolar_MPPT_75-10_up_to_100-20/en/configuration-and-settings.html#UUID-0e24edd3-2ffe-6a04-c067-7e6c5475ad4f
I'm still on 12v - 4 Battleborn 100Ah, running a 12v pump off another MPPT. Usually have it off, only turn it on when I need it. 4 Battleborn 100Ah
Didn't get it going. It did reset my battery options and probably the load operation mode which is BatteryLife. Perhaps I got a bad one.
Difficult to say without a schematic etc, but it's possible the unit may be faulty.
