question

chrispi avatar image
chrispi asked

Mppt 50/100 smart lost bluetooth after update to 1.6.3, how to reinstall firmware

Hi all,

I updated my 3 x 50/100 MPPT smart from 1.6.2 to 1.6.3. And update run fine but 2nd MPPT lost BT after update. its not showing up on the BT list of tablet or phone and doesn't connect via BT connect. Tried reseting by disconnecting both connections through input and output breakers for 1h and back on, BT stil not working but its operating fine.

The 2nd Mppt shows up under VRM I can see and also enter its setting. Turn on/off BT in its setting doesn't do anything too. It runs and operates fine as i can see via cerbo/VRM fine but BT is completely gone.

How can I reinstall firmware eg also via vrm on this one MPPT...the other identical 2 MPPT all work fine but 2nd MPPT is working fine but lost BT.

Thank you

Christian

MPPT SmartSolar
7 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thiemo van Engelen (Victron Energy staff) avatar image Thiemo van Engelen (Victron Energy staff) ♦ commented ·

Hi @ChrisPI

Just to be clear: the MPPT without bluetooth does show the bluetooth on/off button when connecting via the Remote tab in VictronConnect? Even after power cycling it again?

Kind regards,

Thiemo van Engelen

0 Likes 0 ·
Show more comments
2 Answers
klim8skeptic avatar image
klim8skeptic answered ·

@ChrisPI It could be that the bluetooth "thinks" it is already connected, and not allowing a new connection.

It would be best to power down and restart. Disconnect PV then battery, wait 30 secs, reconnect battery then PV.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

chrispi avatar image
chrispi answered ·

@klim8skeptic i done that already, actually first thing i tried and no change.

But then you would be still visible on the list of BT devices at tablet or phone, you can just not connect to it. But BT is not visible anymore for MPPT2 on tablets or phone. Bt seams to be completely gone on MPPT2.

That's why how I do reinstall the 1.6.3 firmware again on the MPPT? Or a older one like 1.6.2 and then upgrade to 1.6.3 comes up automatically.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.