question

Rendezvous Solar avatar image
Rendezvous Solar asked

Feeding Quattro with AC1 in and AC2 from the same power source

Good day everyone, am trying to limit my cabling length runs on a proposed installation, so i thought instead of getting GEN for AC1 In and GRID for AC2 In ..

instead get phase one Live and phase two Live from the output of a changeover to feed Quattro AC 1 In and AC2 In respectively and save the cost of running multiple cables.

Please advice. being racking my brain all day long.

ac out 2
img-20190820-100127.jpg (279.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
ben avatar image
ben answered ·

It's hard to tell what your question is or what you're trying to achieve.

Can you (1) explain things in a lot more detail with a full circuit diagram if possible, and (2) ask a specific question to get us started?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

JohnC avatar image
JohnC answered ·

Hi RS. It appears what you're expecting here is for both L1 and L2 to feed together. Unfortunately it's one or the other, but not both.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic