Hi all, i have a pretty general question although i feel it might illicit some complex answers. But here goes. We've just got a new boat and it has 6 x 12v lead acid batteries (110ah each), 1 starter, 1 for the inverter and 4 in a house bank for everything else. There was an old sterling 2000w inverter but that died. There is no shore power and no battery charger. So the batteries only get charged when out on the river - not ideal, particularly if she's left moored for long periods between visits.
I'd like to install shore power, fit a new inverter, a charger and an MPPT for solar input. So my question is what sort of config can you suggest. I'm feeling a bit stuck over what to do about the charger config when faced with 3 batteries banks. I thought about using a Multiplus 12v 3000 Inverter/charger but as far as i know this will only deal with charging a single bank.
Should i consider somehow making the 3 banks into one bank.
Just a bit stuck as to how to proceed.
Any help would very gratefully received.
Thanks
Mike