Hi,
I recently bought 2 VM-3P75CT energy meters to measure the PV power installled on the AC-output of an ESS. So both are in the PV-inverter role.
Both are on the same VE.Can to a Cerbo GX. (they are also connected via the ethernet port but that is not used on the cerbo's config)
I noticed a few things that are not what I expected, I guess also a few of them bugs.
- First: in remote console they both show up (so ok), altough one seems to measure only a fraction about what is happening (I still need to investigate this, any ideas are welcome)
- In VictronConnect under the cerbo in VRM tab, it shows 2 but 2 times the same name with weird values:
(under the local tab it is ok, because they are also ethernet connected)
- In the VRM device list, only one:
- On the VRM firmware tab, I need to press scan, 2 or 3 times before both show up (don't know if this is normal behaviour). Altough this morning this seems to be fixed.
- Under Modbus TCP services, only 1 shows up (so homeassistant integration also only sees 1)
- Same issue in node-red (only 1 available):
Can someone shed a light on this?
Thanx!