question

pwrsaving avatar image
pwrsaving asked

VEbus error 3 not all devices found

VEbus error 3 not all devices found

Random complete loss of power, for under 10 seconds, can see error warnings however the drops do not show up on telemetry, changed all inverter settings, changed the inverters, all RJ45 tested and replaced, still having same issue, causing servers to drop out and have to be rebooted.

VE.Bus
4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

@PwrSaving

More information on your system please.

Servers should be on certified UPS in any case. The switch over on a Victron is not fast enough for that.

1 Like 1 ·
pwrsaving avatar image pwrsaving Alexandra ♦ commented ·
Currently running a hybrid set up, 3 phase system , electric pod runs in tandem with diesel generator , error code last less than 10sec, the error almost seems as if the RJ45 cable is being removed and plugged back in again however there is nobody on site.
0 Likes 0 ·
Show more comments
1 Answer
perry-westphal avatar image
perry-westphal answered ·

I solved the same issue last month:
The negative battery connector of one of the inverters was very hot because the screw was not tight.
My solution: Tightened screw.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

What is VE.Bus?