question

confusion avatar image
confusion asked

Temperature sensor data logging with Cerbo - Possible?

Hi,


I have a Victron temperature sensor attached to the Cerbo, I can see it in VRM portal and I can see the temperature, however there is no history or graphs.


Do I have to set it to start logging? Is it possible?


Thank you

Temperature Sensorvrm logging
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
matt1309 avatar image
matt1309 answered ·
hi @confusion


Have you tried the advanced tab? Normally history can be found in there.

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

confusion avatar image confusion commented ·
Awesome, thanks mate I must've missed it.

Where would I set email alerts for high/low temperature values?


Extra points if you can tell me if/how I can feed that data in to Home Assistant.


Thanks again


0 Likes 0 ·
Show more comments

Related Resources

Victron temperature sensor disambiguation table - which product supports which sensor


Additional resources still need to be added for this topic