question

lukeclose avatar image
lukeclose asked

VE Configure Assistant

Guys

I'm trying to set up my MPII 48/5000 to ignore AC input using Load and SOC

I've set parameters as can be seen in photo but I'm finding SOC isn't working have I missed something.multi-settings.png

VEConfigure 3
multi-settings.png (15.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
ejrossouw avatar image
ejrossouw answered ·

@LukeClose Why not use Victronconnect. So much easier ;)

1710321788489.png


1710321788489.png (333.0 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

lukeclose avatar image lukeclose commented ·
Only problem is I'm trying to do 2 things 1 is I want to keep SOC between 30% and 50% with nighttime loads, which means I can utilize solar charging through the day and 2nd is based on load demand which I can see is achievable using connect app but not SOC.
0 Likes 0 ·
JohnC avatar image
JohnC answered ·

@LukeClose

The SOC mightn't be working the way you want because I think your logic might be backwards. In your case Relay ON means Power OFF.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

lukeclose avatar image lukeclose commented ·
I might give it a try but I would think on is relay closed/connected.
0 Likes 0 ·