Grafana on Linux without docker?

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

kevinc-63559 asked Mar 12, '24

Grafana on Linux without docker?

I have Grafana up and running via Docker on a local web server, but would prefer to run the components native. Doing so would enable automatic software updates when the system is updated.

Obviously need Grafana installed, it is. Obviously need InfluxDB installed, it is. Easy enough to export my Grafana dashboard and import it to a new system. However I'm clueless how to link InfluxDB to my Cerbo to gather the statistics. Am I missing other parts? I see the (4) docker containers... Influx and Grafana are just two of those....

Anyone happen to have a walkthrough (or just hints) on doing this?

grafana linux

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

johnny-brusevold answered · Mar 12 at 09:14 PM

I made a note for how to run grafana and influxdb with venus influx loader on a pi5 with raspberry pi os. Works perfectly for me.

influx  grafana  venus-influx-loader   on pi5  Raspberry Pi OS with desktop 64 bit
----------------------------------------------------------------------------------------------------------------------------------------

install influx

sudo apt update
sudo apt upgrade

curl https://repos.influxdata.com/influxdata-archive.key | gpg --dearmor | sudo tee /usr/share/keyrings/influxdb-archive-keyring.gpg >/dev/null

echo "deb [signed-by=/usr/share/keyrings/influxdb-archive-keyring.gpg] https://repos.influxdata.com/debian bullseye stable" | sudo tee /etc/apt/sources.list.d/influxdb.list

sudo apt update
sudo apt install influxdb

sudo nano /etc/influxdb/influxdb.conf
edit line 15
# Bind address to use for the RPC service for backup and restore.
# bind-address = "127.0.0.1:8088"
bind-address = "127.0.0.1:8068"

save

sudo systemctl unmask influxdb
sudo systemctl enable influxdb
sudo systemctl start influxdb

--------------------------------------------------------------------------------

install grafana

curl https://apt.grafana.com/gpg.key | gpg --dearmor | sudo tee /usr/share/keyrings/grafana-archive-keyrings.gpg >/dev/null

echo "deb [signed-by=/usr/share/keyrings/grafana-archive-keyrings.gpg] https://apt.grafana.com stable main" | sudo tee /etc/apt/sources.list.d/grafana.list

sudo apt update
sudo apt install grafana
sudo systemctl enable grafana-server
sudo systemctl start grafana-server

-------------------------------------------------------------------------

install npm

sudo apt install npm

sudo mkdir /etc/venus-influx-loader
sudo mkdir /etc/venus-influx-loader/config
sudo nano /etc/venus-influx-loader/config/config.json

add to config.jsom, change "hostName": " ip " to your other pi's ip, "change retention time to "inf")?"
------------------------------------------------------------------------
{
  "upnp": {
    "enabled": false,
    "enabledPortalIds": []
  },
  "vrm": {
    "enabled": false,
    "enabledPortalIds": []
  },
  "manual": {
    "enabled": true,
    "hosts": [
      {
        "hostName": "192.168.1.101",
        "enabled": true
      }
    ]
  },
  "influxdb": {
    "host": "127.0.0.1",
    "port": "8086",
    "username": "",
    "password": "",
    "database": "venus",
    "retention": "30d"
  }
}
--------------------------------------------------------

cd /usr/lib/
sudo git clone https://github.com/victronenergy/venus-influx-loader.git
cd venus-influx-loader
sudo npm install

----------------------------------------------------------

sudo nano /lib/systemd/system/influx-loader.service

add to file
----------------------------------------------------------
[Unit]
 Description=influx loader Service
 After=multi-user.target

 [Service]
 Type=idle
 ExecStart=/usr/lib/venus-influx-loader/bin/venus-influx-loader.js --disable-admin-api --disable-grafana-api -c /etc/venus-influx-loader/config

 [Install]
 WantedBy=multi-user.target
------------------------------------------------------------
save and exit
 
sudo chmod 644 /lib/systemd/system/influx-loader.service
sudo systemctl daemon-reload
sudo systemctl enable influx-loader.service

"enable MQTT on your venusOS pi"

sudo reboot

runing on port 3000
db venus
import your venus-grafana favorit dashboard

8

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

northtown2022 commented · Mar 15 at 04:39 PM

@Johnny Brusevold I followed your directions and got everything installed on a Pi5. Thank you!

I did get some type of permission error trying to save the edited config.json but after searching it up found that adding 'sudo' before the command allowed it to work:

sudo nano /etc/venus-influx-loader/config/config.json

After everything was installed I imported a dashboard I'm currently running on a Pi4.

I also added Infulxdb as my data source in Grafana and edited in my credentials etc..

I am getting this error in my Grafana dashboard:

Datasource c0c900db-5de0-4efc-b633-5a3f4782db42 was not found

Any ideas?

0 ·

johnny-brusevold northtown2022 commented · Mar 15 at 05:31 PM

@NorthTown2022

Check your data source, with me it is set to venus, and data from venus_default

Edit

Something I figured out on the fly, I had some problems with id, which was solved by selecting 'export for sharing externaly' under export

added sudo to the note

1 ·

ikke-navngitt.jpg (184.5 KiB)

ikke-navngitt2.jpg (30.1 KiB)

northtown2022 commented · Mar 15 at 10:20 PM

My limited understanding of Node-RED, Influx and Grafana has me stuck.

I'm trying to use my existing flow and influxdb data source but it's just not happening. This is the flow I'm currently using with the Pi4 and trying to use with the Pi5.

I don't have npm installed on Pi4. Is it used in place of Node-Red on Pi5?

0 ·

node-red-flow.png (36.9 KiB)

johnny-brusevold northtown2022 commented · Mar 16 at 07:42 AM

@NorthTown2022

venus-influx-loader is the program that sets up the database in influx, and listens for the mqtt data stream that is sent from a venus device on port 8086 and forwards it to the database in influxdb

npm is the library used by venus-influx-loader

If you are not going to use venus-influx-loader, you must create the database manually.

1 ·

Show more comments

Modifications Space

Node Red Space

Answer 1 · 2024-03-17T20:43:34Z

northtown2022 answered · Mar 17 at 08:43 PM

@Johnny Brusevold

Success! I can see measurements now.

1710706892717.png (10.7 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-03-17T23:31:00Z

@KevinC_63559

It derailed a bit from what kevinc was asking, since I didn't have the answer.

But looked through a bit, and there wasn't much difference from pi5 to ubuntu/deb

The guide below has been tested on linux Ubuntu 22.04 lts and works flawlessly. I hope I haven't made any typos this time.

and you cannot use influxdb2

influx  grafana  venus-influx-loader   on Linux Ubuntu 22.04 64 bit
----------------------------------------------------------------------------------------------------------------------------------------

install influx

sudo apt update
sudo apt upgrade

curl -fsSL https://repos.influxdata.com/influxdata-archive_compat.key|sudo gpg --dearmor -o /etc/apt/trusted.gpg.d/influxdata.gpg

echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list

sudo apt update && sudo apt install influxdb


sudo nano /etc/influxdb/influxdb.conf
edit line 15
# Bind address to use for the RPC service for backup and restore.
# bind-address = "127.0.0.1:8088"
bind-address = "127.0.0.1:8068"

save

sudo systemctl enable --now influxdb

-------------------------------------------------------------------------------
note

TCP port 8068 is used for the RPC service for backup and restor

--------------------------------------------------------------------------------

install grafana

sudo mkdir -p /etc/apt/keyrings/
wget -q -O - https://apt.grafana.com/gpg.key | gpg --dearmor | sudo tee /etc/apt/keyrings/grafana.gpg > /dev/null

echo "deb [signed-by=/etc/apt/keyrings/grafana.gpg] https://apt.grafana.com stable main" | sudo tee -a /etc/apt/sources.list.d/grafana.list

sudo apt update
sudo apt install grafana
sudo systemctl daemon-reload
sudo systemctl start grafana-server
sudo systemctl enable grafana-server.service

-------------------------------------------------------------------------
note
Default ubuntu 22.04 nodejs is to old for venus-influx-loader
Either you have to upgrade your existing node-js or uninstall it to install this upgraded one, or change version with nvm

The version below (20.x) has nvm built in
--------------------------------------------------

install node-js

cd ~
curl -sL https://deb.nodesource.com/setup_20.x -o nodesource_setup.sh
sudo bash nodesource_setup.sh
sudo apt install nodejs
node -v

sudo mkdir /etc/venus-influx-loader
sudo mkdir /etc/venus-influx-loader/config
nano /etc/venus-influx-loader/config/config.json

add to config.jsom, change "hostName": " ip " to your other pi/venus device ip, "change retention time to "xxd" for numer of days or "inf" forever)?"
------------------------------------------------------------------------
{
  "upnp": {
    "enabled": false,
    "enabledPortalIds": []
  },
  "vrm": {
    "enabled": false,
    "enabledPortalIds": []
  },
  "manual": {
    "enabled": true,
    "hosts": [
      {
        "hostName": "192.168.1.101",
        "enabled": true
      }
    ]
  },
  "influxdb": {
    "host": "127.0.0.1",
    "port": "8086",
    "username": "",
    "password": "",
    "database": "venus",
    "retention": "30d"
  }
}
--------------------------------------------------------

cd /usr/lib/
sudo git clone https://github.com/victronenergy/venus-influx-loader.git
cd venus-influx-loader
sudo npm install
sudo npm install -g npm@10.5.0

----------------------------------------------------------

sudo nano /lib/systemd/system/influx-loader.service

add to file
----------------------------------------------------------
[Unit]
 Description=influx loader Service
 After=multi-user.target

 [Service]
 Type=idle
 ExecStart=/usr/lib/venus-influx-loader/bin/venus-influx-loader.js --disable-admin-api --disable-grafana-api -c /etc/venus-influx-oader/config

 [Install]
 WantedBy=multi-user.target

------------------------------------------------------------
save and exit
 
sudo chmod 644 /lib/systemd/system/influx-loader.service
sudo systemctl daemon-reload
sudo systemctl enable influx-loader.service

"enable MQTT on your venusOS pi"

sudo reboot

runing on port 3000
db venus
URL http://localhost:8086 (this is grayed out, so you have to fill in)
enable 'Basic auth'

import your venus-grafana favorit dashboard

question

Grafana on Linux without docker?

Related Resources

question details

Modifications Space

Node Red Space

question

Grafana on Linux without docker?

Related Resources

question details

Related Questions

Modifications Space

Node Red Space