This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi Newbie here, please be gentle :-)
My setup is a smart solar 100/50 12v
I am trying to understand why the battery voltage is not clamped at the absorption voltage value as set in the app settings ( see picture) 14.4v.
How is the absolute maximum output voltage set on this controller
Many thanks in advance for any thoughts
I failed to mention I have a Smart Battery Sense fitted and connected to the SmartSolar.The temperature got up to 18c yesterday in the batter compartment.
Will higher temps raise the voltage delivered?
Sorry I was wrong, those charts are for days when no engine was running and the battery box was about 8-9c
@Dave Hartley do the math.
-(temp difference from 25c) X -(temp compensation volt value for battery)
That will give you the amount of variance from programmed set absorp volt value.
Thanks both for a simple explanation
