This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Dear forum
my Multiplus 12/500 stopped working. I do not know why (it was running, no manual changes).
When I provide the MP with 13.5V DC from a power supply I can see, that it uses 1.6W. I can measure the voltage between the positive input terminal and the transformator (13.3V DC). But there is no light and I can not see the MP through USB / MK3 interface. No other parts are connected to it.
Does someone has an idea / clue?
Thank you very much in advance,
Christian
Does someone know if this device just has one exchangeable fuse (the one which sits directly at the positive 12V DC input terminal)?
I checked the capacitors (just looking on the surface etc.) - I can't see some obvious damage.
Could it be that the flash storage of the microcontroller is damaged?
Sorry, but you need to contact the dealer and probably return it for service/repair.
Thank you. Unfortunately it is out of warranty. I live in germany: does somone know a good repair shop / contact?
They're only serviceable by Victron. Green Akku have been good to me. Empfehlenswert.
