question

stevemaller avatar image
stevemaller asked

[solved] Can't reset Bluetooth PIN

I did some work on my Sprinter's electrical system, and now I can't seem to get into the Smart Shunt's Bluetooth connection. I tried the two PIN codes I've used, as well as '000000', but none of them works. And the procedure to reset the PIN using the PUK code also fails. Strangely, I can see the Shunt and its data, I just can't get into it to change the settings (I added more battery power). Here's the iOS app log, and a few photos of what I did. VictronConnect_report.logimg-6957.jpegimg-6958.jpegimg-6959.jpeg

Bluetooth
img-6957.jpeg (829.6 KiB)
img-6958.jpeg (153.0 KiB)
img-6959.jpeg (74.7 KiB)
victronconnect-report.log (183.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Justin Cook avatar image
Justin Cook answered ·

You're entering the PUK code from the VE.Bus Smart Dongle. You need to enter the PUK code from the SmartShunt to reset the SmartShunt's PIN.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

stevemaller avatar image
stevemaller answered ·

Oh good heavens thank you! Worked great.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.