I've just replaced 120-2AC with 140-3AC and before connecting the Output 3 (one on the left) to the new battery, I tested the voltages on the Victron.
Situation:
- alternator is not running
- all (engine and service) main switches are off
- Output 1 is connected to 2 service batteries in parallel
- Output 2 is connected to start battery
- Output 3 is not connected
Here's link to the video: https://i.imgur.com/U6fURoc.mp4 (attaching it directly here throws an error).
So, the question: is it normal to have voltages on unconnected output (3) and on input that is not producing current?
Thanks for clarifying in advance!