question

beilstein avatar image
beilstein asked

MultiPlus-II & Quattro-II 48V DC test voltage and dielectric strength for overvoltage protection

We like to know the DC test voltage and dielectric strength for overvoltage protection for the MultiPlus-II & Quattro-II DC 48V (230V AC Version).
Unfortunately, this information cannot be found in the manual.

Multiplus-IIQuattro-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@Beilstein

What standard exactly are you looking for?

Under tech specs in the online manuals and in the datasheets and on the product page under the category of downloads and support there is alot covered.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

beilstein avatar image
beilstein answered ·

we have to meet the requirement DIN EN 60204-1 (VDE 0113-1) Part 6.4 "PELV"

If the IEC 61558-1 or 61558-2-6 is fulfilled for transformers, we did not have to do separat protective measures. However, this is not mentioned in the manual or certificates.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.