question

Stefan Kalin avatar image
Stefan Kalin asked

EV Charger NS charging not starting / relais not hearable

Hello,

I bought a new EV Charger (NS).

Installation and integration into VRM worked fine.


First Car (Tesla Y) was not recognized - after CP calibration it showed of as connected. When hitting "Start" button status changes to "Starting" and then to "Charged" without sending power to the car (Car error: no power available).

There is also no clicking of the relay/contactor hearable.

FW Update and several new CP calibrations aren´t changing anything. Also a full reset to factory settings brings no change in the behavior. 2 different cables tested.


On the same installation with 2 different Typ2 cables a Fronius Wattpilot is working fine.


Any ideas what can still be tried? @Lucian Popescu (Victron Energy Staff) any ideas?


BR,

Stefan

ev charging station
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Lucian Popescu (Victron Energy Staff) avatar image
Lucian Popescu (Victron Energy Staff) answered ·

Hi, can you perform a measurement please? Can you measure the DC voltage between CP and PE on the charging connector? 1709709297712.png


1709709297712.png (40.0 KiB)
5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Stefan Kalin avatar image Stefan Kalin commented ·

Hi Lucian, thanks for your answer.

In the mean time the charger is on the way back for troubleshooting to my reseller. But just in the case they do not find anything what ist the expected voltage between PE and CP?

0 Likes 0 ·
Show more comments
Stefan Kalin avatar image
Stefan Kalin answered ·

In the mean time the EVCS was replaced, hence there was a defect (unfortunately I wasn´t told which one).

Now every thing works great - even 1 <-> 3 phases switching via Beta FW.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.