I have four 500w panels, each panel has Voc of 51.7v, and Isc of 12.28A. The maximum system voltage states IEC1500W. I have a victron 150/60. This is going to go on a 24v (12v 100ah lipo, series then paralled) off grid system. If I series-parallel the panels the victron charge controller will be getting around 103v at about 25A. But then will convert this into the 24v system at 25.6 or so volts with the rest being all amps?, which is about 100amps? Is this correct and is it fine? The second issue is the panels state that the maximum system voltage should be 1500w but can I push it to 2000w (the four panels I said I've got). What are the concerns here? My second setup was to go two panels 1000w (series or parallel?) through the stated charge controller, then another charge controller for the second 1000w (two remaining panels).