This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a Multi RS Solar 48/6000 inverter with 4 pylontec batteries off-grid, but now i want to remove the batteries from this installation to another and i would like to connect to the grid so the grid can complement or replace the PV energy during the night for example, meaning that if during the day the user would be consuming 2kw and the PV was capturing only 1kw, the grid would supply the remaining 1kw. Is this possible?
Thanks a lot Alex very helpfull
No victron system is designed nor supported without batteries.
A simple search would show this answer, numerous times.
In your, particular case, I would try putting a very small 48V battery and configure the system as "Keep the batteries charged". As long as you'll have grid, this will work, because utility grid failure is then the only time battery power will be used
By small batteries I mean, for example 4 x 12V/5A VRLA gel batteries. It's a cheap solution and this way you'll also comply with Victron recommendations.
But beware that any grid failure will mean a load drop, even if the batteries could supply over 1kW power for a short period of time.
Yes thats exactly what i was thinking, if it cannot work only with PV+Grid then i put a battery just for that scenario of grid power failure. More on a UPS style.
Any other battery advice different from the iens you sugested?
Thank you very much for your answer also.
