question

mikekulls avatar image
mikekulls asked

Fake Cerbo GX (PI3) and MQTT

I have setup a PI to run as a fake Cerbo GX and it's working fairly well. I'm trying to pull data from it via MQTT. This is all working mostly fine and all went quite smoothly. I'm quite impressed with how easy this all was to do. The issue is I have is sometimes I can get this huge array of data out, and other times there is nothing there. The image is what I am currently getting. Second image is something like what I get when it's not working. I don't have a screenshot of it not working and I'm not sure how to trigger it between working and not working but it was something like that.


1709038636262.png


1709038774711.png

cerbo gxRaspberry Pi
1709038636262.png (141.6 KiB)
1709038774711.png (11.4 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mikekulls avatar image mikekulls commented ·

Here it is, after a reboot this is all I get:

1709039578268.png


0 Likes 0 ·
1709039578268.png (16.8 KiB)
1 Answer
gone-sailing avatar image
gone-sailing answered ·

Have read about Keepalive? https://github.com/victronenergy/dbus-flashmq#keep-alive

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mikekulls avatar image mikekulls commented ·
Thank you, that worked a treat
0 Likes 0 ·