The photovoltaic system consists of:
* Inverter Victron Quattro 48/8000/110 ;
* N. 2 MPPT 250-70Tr
* 48V Victron battery bank (N.8 Victron battery LFP 200Ah 12,8V - 2 parallel of 4 in series)
* N. 16 PV panels - 390 W
* Victron Energy Cerbo GX + display GX touch 50
The problem is the following: during the battery charging phase, after reaching a SOC of at least 50%, if the energy demand of the connected loads exceeds a certain value, energy is taken from the electricity grid rather than from the batteries: why ? Which parameters need to be changed to increase the share of energy taken from the batteries instead of from the electricity grid?
I attach some photos of some parameters set by the installer and ask: should I change these values?