This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi my installation has a LoRaWAN module connected to the TTN.
(BMV712 and SmartSolar MPPT)
I reinstalled it. lorawan module is connected (green led), I can see the payload date on TTN-Gateway console, but it not being shown on VRM.
(last update 2 months ago)
How can I fix this?
My installation : https://vrm.victronenergy.com/installation/37358/share/c29673ac
Thank you,
Carlos
Hi Carlos,
I see that the last daily update was 4 hours ago and the last hourly update was from 31 minutes ago. LoRaWAN is a lossy network it is very possible that some packets have been lost in transmission this is normal for this type of network. The daily update contains the information that does not change over time like the device ID. The hourly update sends the most important data:
MPPT Solar Charger
For more information please also check the online manual:
https://docs.victronenergy.com/vedirect_lorawan.html
I hope this resolves your question.
Lasse
Hi Lasse,
Thanks for looking it up.
Actually it suddenly started working after trying for 4 days and plugging/unplugging 20 times. I don't know why? It seems fine now. Any clues?
Thanks again,
Carlos
Hi Carlos, unfortunately, I have no way to diagnose the problem. Maybe it is the lossy network, maybe something is going wrong in the gateway. It is hard to say at this point. Plugging and unplugging the unit for 20 times is not what we are aiming for as a solution.
