question

biswa avatar image
biswa asked

How battery temperature reading of Multiplus II can be show up on VRM portal?


Hi, I am using Victron Multiplus II for almost last two years with out any issue. Also using Venus OS through raspberry pi & it helps me to monitor my system through VRM portal.

But I am unable monitor my battery temperature on VRM portal.

Multiplus II comes with a battery temperature sensor & battery temperature is showing in Venus OS as below.

screenshot-2024-02-22-221012.png


Can any body help me on this?


VRMtemperaturewidget vrm
screenshot-2024-02-22-221012.png (83.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
daza avatar image
daza answered ·

Go into advance and then the top right with all the settings select VE bus enable group widgets you should see battery temp there try that

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image
kevgermany answered ·

1000016012.jpgIn the VRM dashboard click on show details.

Temp shows in the battery box.


1000016012.jpg (427.5 KiB)
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

JohnC avatar image JohnC ♦ commented ·
You may need to enable DVCC (STS) to share and report T as a system value.
0 Likes 0 ·
biswa avatar image biswa JohnC ♦ commented ·
Thank you very much John for your suggestion. It's worked.
0 Likes 0 ·

Related Resources

VRM login page

VRM documentation

VRM API documentation

How to change the Owner of a VRM installation

Additional resources still need to be added for this topic