Does anyone know which CCA specification Victron use (SAE, EN, IEC or DIN)? The data sheets simply state “CCA”.
asked
CCA Standards
It states CCA on the datasheets states at at 0°F or almost -18°C. I think only a few standards use that temp value.
Sadly all (or most?) of the specs use -18C. but the voltages differ. For example after 30s DIN specifies >9V whereas SAE >7.2V. In my application (a bow thruster dc motor) this difference is critical.
Most of the other standards used are EN an IEC so probably lean that way.
