question

koji-yamamoto avatar image
koji-yamamoto asked

MPPT 75/15 - Smart Connect does not detect charging

I newly installed Smart Solar MPPT 75/15 on my boat and connected solar panel (12v, 100w) but:

  1. As shown on screen shot attached, Smart Connect says voltage from solar panel is very low and no charging is occurring
  2. Voltage measured at the inlet of Smart Solar is high enough.
  3. More curiously, the ammeter of my boat shows the charging to the batteries is occurring.
  4. Blue ramp at the bottom of three is blinking during above process
MPPT Controllersbattery chargingVictronConnect
vc-scrshot.png (288.3 KiB)
incomming-voltage.jpg (126.6 KiB)
ampmeter.jpg (749.0 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

I think you have connected the solar panel to the load terminal instead to the PV-terminal.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

koji-yamamoto avatar image koji-yamamoto commented ·

Thank you very much for your prompt advice. Yes, I did connect a solar panel on to Load terminal. Have I made awful mistake? Should the panel be connected on to PV?

0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ koji-yamamoto commented ·

Yes the solar panel must connected to PV(photovoltaic).

0 Likes 0 ·
klim8skeptic avatar image
klim8skeptic answered ·

"Voltage measured at the inlet of Smart Solar is high enough. "

Your measuring the voltage of the load terminals.

The most common problem for low PV voltage is a blown fuse/breaker. Also double check that you have connected the PV polarity correct.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

koji-yamamoto avatar image koji-yamamoto commented ·

Thank you for your advice. As above I might made simple mistake...

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic

VictronConnect Manual

Download for iOS / Android / Mac / Windows

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual