question

solaruser125 avatar image
solaruser125 asked

Smartsolar 100/50 Goal Zero 25 amp Fast Charger as PV input

I'm trying to use a Goal Zero 25 am Fast charger as the PV input to charged 3 connected 100amp AGM batteries connected in parallel. For some reason, when I use the Goal Zero fast charger, the only thing that shows up on the victron app under Solar is 15.24V (voltage) and 0.0 A (current) and under battery it says 12.70V (voltage) and 0.0A (Current).

Why isn't this setup working?

I tested the same setup but connected a 100 W solar panel to the PV input and the app showed 62 W from solar and 59 W charging the AGMs.

Thanks for any help here.


smart solar set-up help
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Justin Cook avatar image
Justin Cook answered ·

For an MPPT to initialize and start permitting throughput, it needs to see battery voltage +5v at the PV input, so if your batteries are at 12.70v, the MPPT won't initialize until it sees >17.70v at the PV input. Since your GoalZero battery charger is generally charging at around 14.4v (apparently 15.24 at fast-charge), your setup won't work unless you have <10.24v on your batteries, which is obviously a bit too late.

If you're set on using a charger through your MPPT, get a 24v version. That way you can put around 26.5v to the PV side, your MPPT will initialize and step down the voltage and step up the amperage just like it does when it's connected to actual PVs. (I know this works because I have this setup on my test bench for the express purpose of testing MPPTs).

10 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

solaruser125 avatar image solaruser125 commented ·

Thank you for the explanation. Can you recommend a 24V charger? Thank you again.

0 Likes 0 ·
solaruser125 avatar image solaruser125 commented ·

One more question. if what you are saying about the +5v at the PV is correct, then why was it charging when i plugged in a single 100W panel. I know that the battery was at like 12.5 when the MPPT was charging. Thanks.

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic