Following on from my previous question here: https://community.victronenergy.com/questions/252446/multiplus2-ac-out-2-control.html
I now have it working, but I wonder if there's a conflict.
What I'd like is to have a way of triggering AC Out 2 under two different coniditions:
- Based on SoC (turn on above 95% SoC, turn off below 90% SoC).
- Based on relay 2 control on Cerbo.
Initially, I had just the pair of assistants using SoC values. I then added a second pair of assistants to close the AC Out 2 relay based on the Aux 2 input. At first, this didn't work, until I realised I had to switch the order around in VEConfig. I can now manually control this using Relay 2 on the Cerbo which then drives the Aux 2 which then is set to trigger AC Out 2 on the Multiplus.
Having now switched them around, this is working. Except that it appears the AC Out 2 isn't energised even when SoC is above 95%.
Is this a conflict? Is it not possible to have two sets of programmable relays?
Any suggestions?