VictronConnect Linux Appimage v6.00beta.. not starting

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

Mihai asked Feb 14, '24

VictronConnect Linux Appimage v6.00beta.. not starting

Hello,

I'm trying to run the v6.00beta but nothing happens. No error output message and I'm just getting back the prompt. I've tried the last two beta9 and beta10 files and same behavior...

The previous v5.103 starts and works just fine.

What could be the difference in v6.00?

Later edit:

The current beta11 Appimage outputs "Aborted (core dumped)". Here are the final lines of the /tmp/VictronConnect.log:

[VRGMBC] "0x0383" "0x0383" "VE_REG_BATTERY_MID_POINT_DEVIATION" "sn16" | Size 2 Bytes
[VRGMBC] "0xEC7F" "0xEC7F" "VE_REG_BLE_RSSI" "sn16" | Size 2 Bytes
[VRGMBC] "0xEE0E" "0xEE0E" "VE_REG_BMV_H15" "" | Size 0 Bytes
[VRGMBC] "0xE406" "0xE406" "VE_REG_VEBUS_LED_FLOAT" "un8" | Size 1 Bytes
qt.core.qobject.connect: QObject::connect(QObject, Unknown): invalid nullptr parameter
qt.core.qobject.connect: QObject::connect(QObject, Unknown): invalid nullptr parameter
FATAL 2024-02-14T22:31:48.966 This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.

Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vkkhrdisplay, vnc, wayland-egl, wayland, xcb.

Thank you!

Regards

VictronConnect linux

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thiemo van Engelen (Victron Energy staff) ♦ commented · Feb 15 at 07:50 AM

hi @Mihai

What platform/distro are you trying to run VictronConnect on? And is this running natively or perhaps in a virtual machine?

Kind regards,

Thiemo van Engelen

0 ·

Mihai Thiemo van Engelen (Victron Energy staff) ♦ commented · Feb 15 at 05:35 PM

Hi @Thiemo van Engelen

I was trying to run the app on my main Linux machine, so no virtualization involved...

Here is some relevant information:

Operating System: Linux Mint 21.2
Kernel: Linux 5.15.0-92-generic
Architecture: x86-64

Let me know if you need more info.

Regards,

Mihai

0 ·

Modifications Space

Node Red Space

Answer 1 · 2024-02-15T03:21:51Z

elvis answered · Feb 15 at 03:21 AM

5.97 is the last one that works for me on Ubuntu 22.04

Ver 6 beta 9 produces

/tmp/.mount_VictroDDQruw//bin/VictronConnect: error while loading shared libraries: libQtBluetoothLocal.so.1: cannot open shared object file: No such file or directory

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Mihai commented · Feb 15 at 05:40 PM

Hi,

Exactly the same for me too (ver. 6, beta 9):

$ cat /tmp/VictronConnect.log
/tmp/.mount_VictrogrLeln//bin/VictronConnect: error while loading shared libraries: libQtBluetoothLocal.so.1: cannot open shared object file: No such file or directoy

Regards.

0 ·

Answer 2 · 2024-02-15T04:33:42Z

Mike Yager answered · Feb 15 at 04:33 AM

I am also have the same problems. The last one i could run with out any problems is 5.99 [Ubutntu / mint]

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2024-02-15T19:42:58Z

Thiemo van Engelen (Victron Energy staff) answered · Feb 15 at 07:42 PM

Hi all,

We have found that the v6.00beta## AppImages are missing some libraries and hope to have this fixed in VictronConnect v6.00beta11.

Thank you all for reporting this issue.

Kind regards,

Thiemo van Engelen

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 4 · 2024-02-19T06:35:16Z

elvis answered · Feb 19 at 06:35 AM

@Thiemo van Engelen (Victron Energy staff)

Ver 6 Beta 11 Error

qt.core.qobject.connect: QObject::connect(QObject, Unknown): invalid nullptr parameter
qt.core.qobject.connect: QObject::connect(QObject, Unknown): invalid nullptr parameter
FATAL 2024-02-18T21:32:38.474 This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.

Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vkkhrdisplay, vnc, wayland-egl, wayland, xcb.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 5 · 2024-02-26T10:01:45Z

Thiemo van Engelen (Victron Energy staff) answered · Feb 26 at 10:01 AM

Hi,

Can you perhaps try the latest v6.00beta12? We have made some more changes to the creation of the AppImage.

Kind regards,

Thiemo van Engelen

12

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Mihai commented · Feb 28 at 07:08 PM

Hello,

Unfortunately, it still doesn't work for me.

When running the beta12 AppImage the output in terminal is "Aborted (core dumped)"

Here are the last few lines of the VictronConnect.log:

[VRGMBC] "0x0202" "0x0202" "VE_REG_REMOTE_CONTROL_USED" "un32" | Size 4 Bytes
[VRGMBC] "0x1079" "0x1079" "VE_REG_HISTORY_CYCLE09" "bytearray52" | Size 52 Bytes
[VRGMBC] "0x1101" "0x1101" "VE_REG_NETWORK_IPV4_ADDRESS" "bytearray4" | Size 4 Bytes
qt.core.qobject.connect: QObject::connect(QObject, Unknown): invalid nullptr parameter
qt.core.qobject.connect: QObject::connect(QObject, Unknown): invalid nullptr parameter
FATAL 2024-02-28T20:44:37.194 This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.

Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vkkhrdisplay, vnc, wayland-egl, wayland, xcb.

Thank you for trying to fix it.

Regards.

0 ·

Thiemo van Engelen (Victron Energy staff) ♦ Mihai commented · Feb 29 at 10:38 AM

Hello,

That is unfortunate to hear. This libraries.txt is a list of libraries that are loaded when I run the v6.00beta12 AppImage under Ubuntu 22.04 in virtual. Perhaps you can check whether these are all also available on your system?

Kind regards,

Thiemo van Engelen

0 ·

libraries.txt (4.0 KiB)

Mihai Thiemo van Engelen (Victron Energy staff) ♦ commented · Feb 29 at 03:43 PM

Hi

I've manually checked every library in the file and the following were missing on my machine:

libxcb-cursor.so.0

swrast_dri.so

libpulsecommon-15.99.so

I've installed the first one with: "sudo apt install libxcb-cursor0" and surprise, now it works :)

Later edit: When I click to connect on my device the app crashes. I'm getting this final line in the log:

"FATAL 2024-02-29T17:47:11.083 QtMultimedia is not currently supported on this platform or compiler."

Thanks!

0 ·

Thiemo van Engelen (Victron Energy staff) ♦ Mihai commented · Mar 04 at 08:07 AM

Hi @Mihai

Good to hear that it is now working for you. We will see what we can do to make this requirement more clear.

Kind regards,

Thiemo van Engelen

0 ·

Mihai Thiemo van Engelen (Victron Energy staff) ♦ commented · Mar 04 at 08:31 PM

Hi @Thiemo van Engelen (Victron Energy staff),

I'm not sure what you mean by "make this requirement more clear".

It's a big step forward as the app is starting now, but still not usable since connecting to the "target" fails and crashes the app.

Hope you'll be able to figure out what's wrong. We're here to test and do our best to help :)

Thanks!

0 ·

Show more comments

elvis commented · Feb 29 at 04:40 AM

Victron Connect V6 Beta 12.

Ubuntu 22.04.3 LTS

[VRGMBC] static QHash<short unsigned int, VeRegModbusCodec::VeRegProps> VeRegModbusCodec::loadVeRegPropsFromJson(QString) From ":/ext/shared-definitions/json/vregs.json"

..
..
..
..


qt.core.qobject.connect: QObject::connect(QObject, Unknown): invalid nullptr parameter
qt.core.qobject.connect: QObject::connect(QObject, Unknown): invalid nullptr parameter
FATAL 2024-02-28T19:37:03.657 This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.

Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vkkhrdisplay, vnc, wayland-egl, wayland, xcb.

0 ·

Answer 6 · 2024-02-29T22:44:15Z

Mike Yager answered · Feb 29 at 10:44 PM

Just curious, I ran the "sudo apt install libxcb-cursor0"

and sure enough, it worked!!!!

v6.00 beta12 on Mint (Ubuntu)

Thanks guys!!!

-----

Well it starts up...... it stays running IF you don't do anything...

it shows my (local) devices, but if you click any of them.....it crashes....

making progress.... :)

----------------]

added ......

WARN 2024-02-29T19:03:54.399 qrc:/qml/AssembledFeatureHighlights.qml: No such file or directory
WARN 2024-02-29T19:15:55.691 [VEIBLE] Device discovery already active, doing nothing!
WARN 2024-02-29T19:15:55.826 could not load multimedia backend ""
FATAL 2024-02-29T19:15:55.826 QtMultimedia is not currently supported on this platform or compiler.

-----

Also willing to 'try other' things...

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thiemo van Engelen (Victron Energy staff) ♦ commented · Mar 04 at 08:06 AM

Hi @Mike Yager

Can you perhaps go through the list of libraries I posted in a reply to Mihai and see if they are all available on your system?

Kind regards,

Thiemo van Engelen

0 ·

Answer 7 · 2024-03-04T15:39:16Z

Mike Yager answered · Mar 04 at 03:39 PM

@Thiemo van Engelen (Victron Energy staff)

@Mihai

well lets try again...

i type so slow that the website time out

i happy i can type.... a stroke does that to ya

...

mike@XXXXX:~/Downloads$ sudo apt list libxcb-cursor*
sudo apt list swrast*
sudo apt list libpul*
[sudo] password for mike:
Listing... Done
libxcb-cursor-dev/jammy 0.1.1-4ubuntu1 amd64
libxcb-cursor0/jammy,now 0.1.1-4ubuntu1 amd64 [installed]
Listing... Done
Listing... Done
libpulse-dev/jammy-updates,now 1:15.99.1+dfsg1-1ubuntu2.1 amd64 [installed]
libpulse-dev/jammy-updates 1:15.99.1+dfsg1-1ubuntu2.1 i386
libpulse-java/jammy,jammy 2.4.7-2 all
libpulse-jni/jammy 2.4.7-2 amd64
libpulse-mainloop-glib0/jammy-updates,now 1:15.99.1+dfsg1-1ubuntu2.1 amd64 [installed]
libpulse-mainloop-glib0/jammy-updates 1:15.99.1+dfsg1-1ubuntu2.1 i386
libpulse-ocaml-dev/jammy 0.1.4-1build1 amd64
libpulse-ocaml/jammy 0.1.4-1build1 amd64
libpulse0/jammy-updates,now 1:15.99.1+dfsg1-1ubuntu2.1 amd64 [installed]
libpulse0/jammy-updates,now 1:15.99.1+dfsg1-1ubuntu2.1 i386 [residual-config]
libpulsedsp/jammy-updates,now 1:15.99.1+dfsg1-1ubuntu2.1 amd64 [installed]
libpulsedsp/jammy-updates 1:15.99.1+dfsg1-1ubuntu2.1 i386
....
First one that start the app.. i installed it, boom it works...

#2,#3 They are audio apps ?

so... when i see this, i stop

...

My background is in HW/ processor-ish

When i saw your (Victron) has a inverter / charger... with a 68k I'm sold !

---

I don't say no, but more like a "are you sure?" :D

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thiemo van Engelen (Victron Energy staff) ♦ commented · Mar 05 at 08:03 AM

Hi @Mike Yager

It is not completely clear to me whether VictronConnect now starts or not and whether you can do anything in VictronConnect or not.

Regards,

Thiemo van Engelen

0 ·

Answer 8 · 2024-03-05T12:17:54Z

Mike Yager answered · Mar 05 at 12:17 PM

@Thiemo van Engelen (Victron Energy staff)

hi.

I start app

NO other button are pressed

It will stay running indefinitely.

BUT if I press a button i crushes.

well figure out, there is enough people here that give a darn.

.

Its a "Flat pack"? I think its how you setup the environment.

https://doc.qt.io/qtcreator/creator-running-targets.html

victron001.png (110.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 9 · 2024-03-15T15:39:52Z

Mihai answered · Mar 15 at 03:39 PM

Hello all,

Just tested the v6.00 release version of the Linux Appimage and surprise: It works!

No crashing when connecting to the device.

Very nice work, thank you!

Regards

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thiemo van Engelen (Victron Energy staff) ♦ commented · Mar 18 at 08:59 AM

Hi

Good to hear that everything is working and thank you for your patience and cooperation.

With kind regards,

Thiemo van Engelen

0 ·

question

VictronConnect Linux Appimage v6.00beta.. not starting

Related Resources

question details

Modifications Space

Node Red Space

question

VictronConnect Linux Appimage v6.00beta.. not starting

Related Resources

question details

Related Questions

Modifications Space

Node Red Space