question

greatdane avatar image
greatdane asked

Multiplus II power usage when using Shore Power

When the multiplus II 24 3000va, and it is connected to shore power, how much power does it use?


Multiplus-II
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Kevin Windrem avatar image
Kevin Windrem answered ·

The idle power in the spec sheet should give you an approximation but I believe this is the DC power while inverting with no AC loads. AC input power with no loads and not charging the battery will likely be a bit higher.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

greatdane avatar image greatdane commented ·
I assume the same also. I was hoping that somebody in the victron community had any observations from their own experience. If they are connected to shore power and the battery is full, then would multiplus II be using much power other than standby 11watts, to power everything that requires AC power?
0 Likes 0 ·