This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I would like to extend the relay outputs with an additional card, but with the new firmware on Cerbo gx, it no longer gives me the possibility to activate the 4 additional relays.
When I install the RemoteGPIO on active packages it give no file set for firmware 3.14 and 3.20-45
Guimods is not yet updated for 3.20-45, and until it is you will not be able to see the additional relays in the gui. How are you connecting the relay modules? RS485? Or wifi/Ethernet? If you are using tcpip then you can install the relay modules using my repository here.
thanks fo repply
by USB to RS 485 adapter
https://community.victronenergy.com/questions/166784/solution-adding-external-relays-to-cerbo-gx-using.html
Yes, please post future issues of this kind to the appropriate GitHub issues section. As Derrick says, I get notification of any issues posted there and may miss posts here as I did with this one!
GuiMods v10.0 does in fact have file sets for v3.14 and v3.20~45 as well as other recent releases and prereleases.
