Would be nice if the 712 and even the 75/15’s could report Max amp in/out similar to Pmax and low and high V info that gets logged. I think this info would be helpful to better troubleshoot the system and to better monitor and manage loads when there is no Pv.
It seems this info is available in real time, but not recorded in the daily history.
In the case of the chargers, it would be nice to know the max Amps provided to bank. And then one could use the battery monitor to know what is happening when the chargers are asleep and loads are drawn from the bank.
For the chargers it would probably make sense to separately monitor what the load outputs are providing. This would probably help those who are having problems supplying power with them powering loads.
