question

banne avatar image
banne asked

Why when battery is idling its still using power?

Why when my battery is 100% SOC, the grid feed-in is 0W the Multiplus 2 is still using power from the batteries? Its never 0A, its always between -1A and -2A. Why is this happening? This usage costs me 3-5% SOC overnight for nothing. I have 2 sets of batteries which are doing this, one set which does not. Both LFP batteries with Seplos BMSschermafbeelding-2024-01-29-om-212838.png

Multiplus-IIESSLithium Battery
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wilm avatar image
wilm answered ·

Hey Benne,

1st:
check to following: Are you 2 Seplos BMS packs well configured? The basic settings start to balance below 3,4V. This will eat energy with no result.

Your Multiplus will draw approx 18 watts self-consumption. Keep this in account as well.

And finally for ESS: What is you grid-setpoint? It should be around zero.

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

banne avatar image banne commented ·
Yes grid is 0. What balance minimum voltage should it be for this?
0 Likes 0 ·
Show more comments