question

basco avatar image
basco asked

Temperature sensor not connected to negative terminal

Hi Everyone,

Does the temperature sensor of the Multiplus II 5000 measure temperature if it is not conected to the negative battery terminal (temperature sensor is left floating)?

Thanks!

Multiplus-IITemperature Sensor
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
daza avatar image
daza answered ·

Yes it will measure the temperature around it, the lug is actually not an electrical connection.

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·
Not sure. Why is it specific in the instructions the it's connected to the negative terminal if there's no electrical connection to the lug?
0 Likes 0 ·
sean avatar image sean kevgermany ♦♦ commented ·
The lug is simply a convenient enclosure for the sensor.
1 Like 1 ·
daza avatar image daza kevgermany ♦♦ commented ·
If you are wanting to measure the negative side of the battery then you fix it to the negative the lug is just a method used for fixing two of the four temp sensors that I have are used to monitor the ambient temperature and one on the negative terminal and the other on the positive if it was an electrical connection I could not complete any of the other methods used to get temp read outs. Hope that helps explain
0 Likes 0 ·
theo74 avatar image
theo74 answered ·

The external temperature sensor for the Multiplus is glued in the cable eye, and is fully isolated. The cable eye can be mounted on to the negative terminal of the battery, or on to the negative busbar of the battery installation.

As far as I know certain battery types require a lower charging voltage during warm operating conditions and a higher charging voltage during cold operating conditions. In this case you need to do temperature compensated charging with the Multiplus, needing the externe temperature sensor.




2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dwmarine avatar image
dwmarine answered ·

A few installers are sticking the temp sensor on the side of the battery, Normally along the long side of the battery at about two thirds of the battery height, this is where the warmest electrolyte sits.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.