question

renejk avatar image
renejk asked

Venus GX relays , can I use ML-RBS 7700 latching relays ?

I am looking to use the Venus GX together with a 712smart to shut down loads and charge busses based on voltage to prevent over- under charge of the batteries, can the Venus GX do this ?

Furthermore , if this is possible can the Venus GX operate latching relays ?

thanks

Rene


Venus GX - VGX
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Paul B avatar image
Paul B answered ·

The venus / CGGX units relay state in its standard off the shelf setup is on or off, most latching relays only require momentary power. so to use a latching relays you would need to add some sort of timer setup to run latching relays instalation

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

renejk avatar image
renejk answered ·

thanks Paul !

I was afraid of that , so back to the drawing board

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.