question

scheu avatar image
scheu asked

Using orion-tr 48/12-30 with UPS Multiplus-Pylontech

I would like to use the UPS System Multiplus-II with Pylontech Batteries.

To support old 12V loads, i would like to use an orion-tr 48/12-30 directly in the 48V dc-circuit.

Is this possible?

Is there any possibility to get power out out of the 48V-DC circuit in this setting?

Thanks a lot!

pylontech-with-orion-possible-question.jpg


Multiplus-IIPylontechorion dc-dc
pylontech-with-orion-possible-question.jpg (74.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
kevgermany avatar image
kevgermany answered ·

You can take a 48V feed directly from the central busbar

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

scheu avatar image
scheu answered ·

I'm still not shure about my concerns.

As there is no smart orion-tr for 48V systems, do I need an additional shunt, so the system can distinguish between the power going to the batterie and beeing used for other 48V consumers (as the orion DC-DC converter)?

I don't want to mess up the BMS System and shut down the batteries...

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.