This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
In the datasheet of the Inverter RS 48/6000 is only listed the Zero load power with 20W, but no stand by power in remote off mode.
Remote off is possible by the App or node red for example or the aux in.
But the inverter dont have a normal power switch, right?
Is the inverter state remote off, is power on only possible by a new remote command, right?
There is a physical way to disconnect PV and an normal on off button on the bottom
Hi Alexandra, it is the inverter RS with the solar MPPT. It has a power off for the solar power and i saw now the smaller switch for on off. Thanks. The inverter RS has it too on the left side. This one is not in the manual of the inverter RS as a part with any comment. I think it is for power on and off.
Now is only open my question to the standby power in the Remote off state.
Yeah sorry with the title of the post I looked at the one with the mppt built in. That is the one we own. Same form factor anyway.
I don't think I have ever switched it off just leave it idle and on. It draws around 30W with no load and not charging.
