Hi developers
@Guy Stewart (Victron Community Manager) , @Thiemo van Engelen (Victron Energy staff)
Something else to report....
1. Open VictronConnect, select device (Multi RS Solar in my case) and go to Settings
2. Perform some modifications
3. Save config under a chosen name.
4. Loading from settings is OK, but instead
5. Exit Settings, exit device and now you are on the Device list page, so no device opened yet
6. Go to app main menu on upper left (three horizontal lines)
7. Go to Setting Files Manager
8. Click on the file you just saved on (3) - error loading file #7
9. The same if you click on three dots on the desired file and click open
Thank you,
Alex