question

duto69 avatar image
duto69 asked

MPPT 250/100 rev2 high temperature?

Hi,


My system start cut off power from MPPT. When I check alarm logs, it is empty - no alarms log found. MPPT go 5 time during two minutes to OFF state. More detail info in pictures.

When I check temperature of MPPT with termal camera Flir, maximum temperature was around 45 celsius.

It happen yeasterday and today at same time.


DVCC is off


devices in system:


MultiPlus-II 48/5000/70-48
BMV-712 smart
MPPT 250/100
200Ah gel battery


https://imgur.com/a/Ot7yf2d


MPPT Controllerstemperature
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

What is the configuration of your PV? Was there enough PV Voltage to maintain charge?
What about the remote on/off terminal, is that circuit closed, is the jumper in place?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

duto69 avatar image duto69 commented ·

PV - 20 pcs of Q-cell 330Wp. There are 4 paraller with 5 in series.

PV voltage jump at top 185V and current fall down to 0A when power is cut off.


Remote on/off - the jumper is in place.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual