question

mike-6 avatar image
mike-6 asked

VE.Direct & USB-VE.Direct Inputs Mixed Up & Inoperative

I have four VE.Direct inputs to my Ekrano (three Smart Shunts and a solar charger). Of the three that plug directly into the VE.Direct ports, Ekrano says one of them is connected by USB (!), whereas Ekrano ignores the one that is actually plugged into its USB port via a VE.Direct-to-USB interface. No amount of unplugging and telling Ekrano to forget disconnected devices fixes this problem. Ekrano is convinced there are only three VE.Direct connections, one of which is via its USB port. Something, I presume, is stuck in Ekrano's memory. What about a firmware update that has two lines in the I/O settings screen for VE.Direct and for USB ports, with an option being to reset them?

VE.Direct
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

I guess you already tried to restart the Ekrano?!

You could also try to do a factory reset:
https://www.victronenergy.com/media/pg/Ekrano_GX/en/reset-to-factory-defaults-procedure.html

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mike-6 avatar image mike-6 commented ·

Yes, many restarts/reboots/head scratching, etc. But I have not yet resorted to resetting to factory defaults. Thanks for the link on how to do so, Matthias. If no one has any better ideas then I will attempt the reset. Incidentally, I was disappointed that Victron's VE.Direct-to-USB interface has a male plug, so it does not connect to the male VE.Direct cable coming from my auxiliary battery's Smart Shunt, necessitating a solder splice to mate the two together. (I scoured the internet for a female-female connector but none seems to have yet been manufactured.) Thanks for your help, Mike.

0 Likes 0 ·
Show more comments

Related Resources