question

davto avatar image
davto asked

Charging both AGM and Lifepo with Phoenix Smart charger

Can I program the Phoenix Smart charger with three different charging profiles for the three outputs?

One output for Lifepo, and the other two for AGM?

charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Mike Dorsett avatar image
Mike Dorsett answered ·

No, the same voltage is applied to all batteries. However, if the Voltage requirements are not too dissimilar, you can use the lowest of the voltages for programming the set points. Generally this is possible for 12V systems, but not so much with higher voltage systems.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

davto avatar image davto commented ·
Thanks a lot for the clear reply, very helpful.
0 Likes 0 ·

Related Resources

Chargers.

Additional resources still need to be added for this topic