I live in the northern latitudes of the USA. In the winter when cold, propane generators sometimes fail to start on the first attempt.
When the Cerbo initiates the generator start and the output of the generator is not detected at the AC input (due to generator failing to start), the Cerbo flags a "Generator Not Detected". The Cerbo continues to hold the relay energized, but does not attempt additional tries to start the generator. Like de-energizing the relay, waiting for 15-30 seconds then attempting to start the generator again.
Does anyone know if the Cerbo can be setup to make additional (ie. up to 3 times) attempts or until the generator voltage is detected at the AC input?
I am referring the way that a Magnum AGS will try multiple attempts if a generator fails to start on the first try.
Is there anybody at Victron that can address this issue?
Thank you for considering this.
Dave Adams