If the Quattro is connected to the grid and controlled by a Cerbo by DVCC, what happens to the Quattro when the power of the Cerbo is cut?
The context of my question is the following:
I have a Smart Lynx BMS, a Cerbo, and 3 Quattro's in 3-phase configuration. The Cerbo is fed by the AUX terminals from the Lynx BMS. If the BMS contactor opens, the AUX source will be on for 5min. After that the Cerbo will have no power anymore and will shut down. In that case, I want that AC-in 1 from the Quattro is still passed through to AC-out 1.
When there is no grid, the system is completely dead when the BMS contactor opens. If the grid is restored, will the Quattro start charging automatically even if the Cerbo is not powered up yet and the manual switch on the Quattro is also not toggled?
Many thanks!