How can I see both Grid and Generator on VRM

I have a cerbo GX and 2x 12/2000 Multiplus running in parallel

I want to be able to see both a.c inputs on VRM I'm able to see the generator and grid on vrm but not the AC input on the generator. Please help

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

snoobler commented · Jan 04 at 05:43 PM

What do you mean? MP only have one AC input, AC input 1. You assign the label to the AC input 1 in the Cerbo Settings > System setup.

Since you don't have a Quattro, you don't have an AC Input 2.

While you may have two inverters with two AC inputs, they are both AC input 1. Inverters in parallel are essentially treated as one big inverter.

0 ·

Matthias Lange - DE ♦ snoobler commented · Jan 04 at 06:01 PM

@snoobler "much to learn you still have, my young padawan" :D

With the "VE.Bus System Configurator" the setting "Switch as a group" you can configure two MutliPlus to act like a Quattro.

@MAXTOSEA can you maybe make some screenshots? I'm not exactly sure what you are mean.

2 ·

snoobler Matthias Lange - DE ♦ commented · Jan 04 at 06:05 PM

Yeah, but can you display them separately?

0 ·

Matthias Lange - DE ♦ snoobler commented · Jan 04 at 06:16 PM

Depends on what/where you want to see it separately.

The VRM dachboard looks something like that:

But only one input can be used at the time and so you will also only see details of the active input.

0 ·

1704392109494.png (29.5 KiB)

Show more comments

question