GbbOptimizer (a professional DESS alternative)

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

This question was closed Aug 26 at 05:40 AM by nickdb for the following reason: Please continue topics on the new modifications forum. thanks

question

Peter asked Jan 4, '24

GbbOptimizer (a professional DESS alternative)

You can also try other DESS alternative: gbboptimizer.gbbsoft.pl

Program has two optimizers:

The first one try to discharge battery if during next 24h there will be too much power and/or charge battery if during next 24h you don't reach 100% (or other defined MaxSco). It can be joined with Dynamic Scheduler to move schedulers to cheapest prices or Dynamic Discharch to discharge on highest prices.
The second one is based on purchase prices, sale prices, value of energy in battery and maximizes profits (like Victron Dynamic ESS). But you have more control over it. For example, you can charge up to 90% but on selected days of month you can charge to 100% (this works also with first optimizer)

Program can also help you with:

Full statistic per hours, days and months.
change start of schedule(s) based on minimal purchase price for almost all countries in Europe.
discharge batteries based on maximal sale price.
force the sales of energy when the sale price is above the set price
limit the sales when the price is below zero.
optimize schedule(s) at night (or during cheap electricity tariff) in such way than on day there is a free place in battery for power from PV.
optimize 'Discharge Plan' in such way than on day there is free place in battery for power from PV.
delay charge battery to period with minimal prices in exchange for selling electricity
calculate profits (in money) from Victron and PV systems
InterPlant Balanser: for two or more noequal Plants connected to one grid optimizer tries to transfer excess energy from one plant to other (and not to grid)
'MasterPlant': to connect multiple Plants into one virtual Plant and optimize it as a whole. Good when you want to charge battery in ones plant from inverters in other plant (with Inter-Plant Balancer).
UK: 30 minutes time slots.
UK: different tariff for purchase and sales prices
UK: temporary change price for given period.

In additional:

Using ESS, so program respects all setting and limits.
Valuation of energy in the battery based on average purchase price (price only during charging from grid, charging from PV is free) and takes into account during optimalization
Optional include battery cost.
Import average house Load from VRM
Exclude extra loads (eg. EV car charging, heating pump) from house load profile
Import EV charger energy from Victron, from Tesla chargers, from HomeAssistant or automatically detect.
Forecast of Heating Pumps/AirCond based on forecasted outside temperature.
Import PV forecast from one of 3 sources (including VRM itself)
Integration with HomeAssistant
Compare kWh from Victron with kWh from your Electricity Supplier

Technically:

This is SaaS = Software as a Service
Servers are located in EU
Victron: You don't install anything on Cerbo
Victron: You don't need NodeRed.
Victron: You must have connection with VRM.
Victron: The program connects to Cerbo once an hour and modifies Cerbo settings.

Over 180 registered users!

FB: https://www.facebook.com/GbbVictronWeb

Discord: https://discord.gg/XEhNSqQ6Jj

ESS dynamic ess

1704397883525.png (48.7 KiB)

1704397924771.png (71.8 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2024-01-05T19:24:25Z

Peter answered · Jan 05 at 07:24 PM

AutoConverter to convert super loads (ex. EV charge) to Extra Loads (Extra Loads are not taken into account during calculate Loads forecasting)

smartselect-20240105-202233-edge.jpg (261.3 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-01-08T20:50:29Z

Peter answered · Jan 08 at 08:50 PM

Optimizer based on prices has some interesting options:

smartselect-20240108-214917-edge.jpg (131.7 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2024-01-09T17:53:58Z

Peter answered · Jan 09 at 05:53 PM

Optimizer calculates value of power in battery every hour and takes it into account during optimizing profits.

1704822823862.png (39.5 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 4 · 2024-01-09T17:58:02Z

Peter answered · Jan 09 at 05:58 PM

Program also calculates efficiency of Victron system:

1704823072578.png (17.9 KiB)

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pau1phi11ips commented · Feb 18 at 01:34 PM

Is this still available in v9.5? I can't seem to find where it is.

Amazing work btw! Thanks so much for sharing.

0 ·

Peter pau1phi11ips commented · Feb 18 at 02:08 PM

Yes, in "Gain/Profits" module. But now charge and discharge are calculated separately:

Efficiency also depends on BMS: how it really calculate SOC of battery. That why on my battery I have Discharge Efficency% >100% :-)

0 ·

1708265241815.png (37.3 KiB)

Answer 5 · 2024-01-10T18:24:38Z

Peter answered · Jan 10 at 06:24 PM

Program correct PV Forecast based on real production from past.

1704911050882.png (41.3 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 6 · 2024-01-12T13:16:16Z

Peter answered · Jan 12 at 01:16 PM

Version 9.0 https://gbboptimizer.gbbsoft.pl/

- Change the name of program from GbbVictronWeb to GbbOptimizer :-)

- Add support for 30min time slots (in UK)

- Add different tariff for purchase prices (for UK).

- Add export whole configuration to XML file.

zrzut-ekranu-2024-01-06-205300.jpg (32.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 7 · 2024-01-14T19:32:06Z

Peter answered · Jan 14 at 07:32 PM

You can choose one of 3 different PV forecast source:

1705260692238.png (30.2 KiB)

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

hominidae commented · Feb 18 at 03:55 PM

@Peter what about solcast users who have a different allowance of calls per day for their rooftop account (i.e. I am allowed 50 calls per day)?

0 ·

Peter hominidae commented · Feb 18 at 07:52 PM

if your data are available by standard solcast API that no problem. If your data are available by other API than I must add new import.

No user has other than "hobbyist account" up to now. :-)

Program import data every 3 hours, so 10 calls are enough.

0 ·

Answer 8 · 2024-01-14T19:33:38Z

Peter answered · Jan 14 at 07:33 PM

Program compare PV forecast with real data and calculate accurancy% for every month.

1705260781487.png (32.5 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 9 · 2024-01-15T12:59:30Z

Peter answered · Jan 15 at 12:59 PM

During schedule charge the 'charge limit' or 'input limit' can be temporary changed:

After time of this scheduler program restores previous value of this property.

1705323535615.png (53.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 10 · 2024-01-16T14:53:01Z

Peter answered · Jan 16 at 02:53 PM

Version 9.1 https://gbboptimizer.gbbsoft.pl

- Almost all tables can be exported to Excel.

1705416832862.jpeg (15.5 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 11 · 2024-01-17T17:15:47Z

Peter answered · Jan 17 at 05:15 PM

If you don't want use optimizer based on prices there are some sub-optimizers. Two of them optimize schedulers:

1705511728066.png (43.0 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 12 · 2024-01-18T16:44:51Z

Peter answered · Jan 18 at 04:44 PM

In Victron we have Schedulers = plan of charge, but there is no plan for discharge. So in GbbOptimizer there is plan for discharge:

Charge has higher priority then discharge.

1705596287643.png (23.2 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 13 · 2024-01-19T18:38:34Z

Peter answered · Jan 19 at 06:38 PM

Version 9.2 https://gbboptimizer.gbbsoft.pl/

- New submodule in module 'Gain/Profits': 'Compare to Bill' - compare kWh from/to grid imported from Plant with data from your Electricity Supplier. You can import data manually or from one of predefined imports.

- Compare to Bill: Predefined imports for: "Poland: PGE (.csv)", "Poland: ENEA (.csv)", "Poland: TAURON (.csv)", "Poland: ENERGA (.csv)"

1705689506477.jpeg (211.1 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 14 · 2024-01-22T18:40:09Z

Peter answered · Jan 22 at 06:40 PM

Version 9.3 https://gbboptimizer.gbbsoft.pl

- Fast setup: After creating Plant, you can continue setting the program in new FastSetup module.

1705948803082.jpeg (100.3 KiB)

4

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

daniel-feist commented · Jan 22 at 07:19 PM

I tried to use this, but can't even work out how to configure a simple fixed import tarrif;

23.30->05.30 7.5p, otherwise 31p. Also, this aside unclear if it works alongside ESS, instead of ESS or what the general approach is..

0 ·

Peter daniel-feist commented · Jan 22 at 07:40 PM

Program dynamically changes Schedulers in ESS.

1 ·

Peter daniel-feist commented · Jan 22 at 07:36 PM

Setup "Purchase Prices are:" as "Fixed". Click at "Edit Transportation Costs/fixed Purchase prices" and fill this table. On bottom there is copy tool, so after fill Monday you can copy data to other weekdays.

I send you email about other issue: I think you have BETA of firmware where there is a BUG in mqtt, so answer to email.

0 ·

Peter Peter commented · Jan 22 at 08:13 PM

To workaround the Bug check this checkbox:

0 ·

screenshot-20240122-210928-edge.jpg (291.1 KiB)

Answer 15 · 2024-01-23T19:58:40Z

Peter answered · Jan 23 at 07:58 PM

Discharge Plan has a lot of interesting submodules. For example, you can fast discharge battery for given time or/and to given SOC:

1706039901910.png (14.1 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 16 · 2024-01-24T21:46:25Z

Peter answered · Jan 24 at 09:46 PM

Other interesting submodule is simulate "Price<0". It can be use for example to temporary disconnect from grid:

1706132771933.png (8.1 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 17 · 2024-01-26T14:40:14Z

Peter answered · Jan 26 at 02:40 PM

Version 9.4 https://gbboptimizer.gbbsoft.pl/

- Forecast: program saves forecast every hour in history (after Hour Job or on request) and keeps history of forecast for 24 hours.

- Gain/Profits: Separation of Efficiency% calculation into Charging Efficiency% and Discharging Efficiency%

zrzut-ekranu-2024-01-26-144133.jpg (70.5 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 18 · 2024-01-28T16:16:50Z

Peter answered · Jan 28 at 04:16 PM

If you don't want use optimizer based on prices there are some sub-optimizers. Three of them optimize discharge plan:

1) Discharge when prices are highest:

2) Don't send power to grid until highest prices:

3) Discharge only during day or night (day=from sunrice to sunset)

1706458408646.png (23.8 KiB)

1706458472443.png (22.7 KiB)

1706458542202.png (12.2 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 19 · 2024-01-30T09:37:52Z

Peter answered · Jan 30 at 09:37 AM

Program can import prices from different sources:

"No prices..." can be use with fixed prices, not depending on dynamic prices.

For UK you can setup different tariff for export and different tariff for import

For Poland there is support of 'hour balance'.

1706607321360.png (15.4 KiB)

1706607347628.png (21.2 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 20 · 2024-02-02T13:06:22Z

Peter answered · Feb 02 at 01:06 PM

Version 9.5 https://gbboptimizer.gbbsoft.pl/

- Profits: Calculate value of Electric Vehicle charge energy (also Heating Pomp, Generic 1 and 2) per hours, per days and per months.

1706879183795.jpeg (53.5 KiB)

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

hominidae commented · Feb 18 at 03:52 PM

@Peter can you please elaborate on how you capture data for EV, heatpump, etc.

For example, I have a non victron wallbox for my EVs and a separate tariff for heatpump and EVs (fixed price) from household (tibber).

With my local Node-Red installation, I am able to feed/provide Power-measurement for Grid, Household, heatpump and EVs, though...VRM is not able to distinguish these.

Also, I've read in your summary on your homepage, that PV-energy stored in battery (or directly used) is considered with a cost of zero, which is simply not true...at least for people which are allowed to feed-in for a fee, the are loosing that money, hence.

TIA,

hominidae

0 ·

Show more comments

Answer 21 · 2024-02-07T13:33:02Z

Peter answered · Feb 07 at 01:33 PM

'Optimizer based on prices' works very well also with very simple price schemas.

1707312702273.png (108.5 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 22 · 2024-02-18T14:53:11Z

Peter answered · Feb 18 at 02:53 PM

Version 9.6 https://gbboptimizer.gbbsoft.pl/

- Fast price change: (specially for UK) Sales or/and purchase price can be manually change for given period.

1708267987417.jpeg (83.7 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 23 · 2024-02-19T13:52:09Z

Peter answered · Feb 19 at 01:52 PM

Version 9.7 https://gbboptimizer.gbbsoft.pl/

- Battery Forecast: 'Test Mode' fast switch on and off. In Test Mode program doesn't send data to inverter.

1708350723408.jpeg (33.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 24 · 2024-02-21T20:24:43Z

Peter answered · Feb 21 at 08:24 PM

Version 9.8 https://gbboptimizer.gbbsoft.pl/

- Schedules: You can define periods to limit charge (eg. at night). This has lower limit that charge limit on schedule.

1708547067446.png (95.9 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 25 · 2024-02-24T15:28:13Z

Peter answered · Feb 24 at 03:28 PM

For 'Optimizer based on prices' there is special option to setup days where battery should be kept about 2h with 100%.

1708788478680.png (22.0 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 26 · 2024-03-03T18:23:29Z

Peter answered · Mar 03 at 06:23 PM

> julienlg commented · Feb 19 2024 at 2:13 PM

> Hello,
> I would like to input 30-minute time intervals. How can I do this?

We support 30-minute time intervals (eg. for UK).

> Ants Kosmos commented · Feb 13 2024 at 10:12 PM

> Suggestion.Important. In Estonia electricity taxes in weekdays from 7 to 22 are higer. What ever is kwh price.I use dess and what i see tomorrow ? Pure charging. 12kwh. Please make charge time at night only. I have 60kwh battery. VRM portal id is b827eb33b05e. I think no one is in estonia not want charge battery at weekday day. Sry my english.

We support different electricity taxes in any day and any hour.

> kent2ben

> Any plans for implementing the feature below ?
> "Support differing transportation costs through different times of the day"

We support different transportation const throught different times of the day and different days of week.

3

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kent2ben commented · Mar 03 at 06:32 PM

Hi @Peter

Thanks for a quick reply! That sounds awesome!
In Denmark we have the following transportation timeslots

00-06
06-17
17-21
21-00

How does I implement that ?

The documentation says:

"Denmark

In Denmark there are dynamic transport charges, depending on the time of day. At the moment there is no support for this in our system, but we will plan to add it later on."

0 ·

Peter kent2ben commented · Mar 03 at 06:53 PM

Very simple. You fill such table:

1 ·

1709492019687.png (58.6 KiB)

Peter kent2ben commented · Mar 03 at 06:55 PM

You have also copy tool:

1 ·

1709492152358.png (30.3 KiB)

Answer 27 · 2024-03-05T13:11:41Z

Peter answered · Mar 05 at 01:11 PM

> some-user

> I'm using LFP, not that big problem for this battery type but even LFP needs some absorption from time to time. Nevertheless DESS should respect absorption time....

We have Optimizer option to keep 100% for 2h-3h for selected days in month. :-)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 28 · 2024-03-05T13:55:18Z

some-user answered · Mar 05 at 01:55 PM

Hi Peter, where can I find that optimizer setting?

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Peter commented · Mar 05 at 02:51 PM

Hello. If you select "Optimizer based on prices" you can see options:

And some options are on Plant:

1 ·

1709650266261.png (20.1 KiB)

1709650313266.png (35.1 KiB)

Answer 29 · 2024-03-06T08:41:17Z

Peter answered · Mar 06 at 08:41 AM

> dirks-1

> Do the enhancements also account a heater like MyPV ACthor? Of course it is just a high load for the system but the operation usecase is slightly different than a EV or heat pump.

> My understanding for EV or heat pump is that they produce the high load when they need it and the ESS just need to deal with it and bring this load into account.

Our program automatically recognizes high load, move load to 'Extra loads' section and exclude it from Load forecast. :-)

3

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dirks-1 commented · Mar 06 at 10:28 AM

Sounds good, but i'm afraid that you will have full access to my ESS after i have entered my data.

0 ·

Peter dirks-1 commented · Mar 06 at 11:07 AM

Yes, you're right. Victron doesn't do Tokens to Cerbo. If you don't like it you must wait for DESS (which has full access to your system, too)

0 ·

Peter dirks-1 commented · Mar 06 at 11:09 AM

If you have HomeAssistant (or can create software) that there is open protocol and you write software to communicate to Cerbo. Then you have full control.

https://gbboptimizer.gbbsoft.pl/Manual?Filters.PageNo=11

0 ·

Answer 30 · 2024-03-08T10:38:39Z

Peter answered · Mar 08 at 10:38 AM

Leon Backbier

> System Not Charging Batteries Despite Negative Electricity Prices

Our system automatically prepare battery for negative prices and will charge at full speed

1709894302864.png (62.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 31 · 2024-03-12T13:04:07Z

Peter answered · Mar 12 at 01:04 PM

GbbOptimizer: Increase your PV profits with us!

https://gbboptimizer.gbbsoft.pl/

Version 9.9

- Easy User Interface: In 'Plants' module you can switch between Easy and Advance User Interface. In Easy UI less important options are hidden.

1710248644940.jpeg (30.1 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 32 · 2024-03-15T12:43:36Z

Peter answered · Mar 15 at 12:43 PM

Version 10.0 https://gbboptimizer.gbbsoft.pl/

- Due to great interest in the project and the need to launch another servers, we (with heartache) are introducing small subscriptions. The subscription cost is PLN 10/10kWh/month of batteries (about EUR 2.22/10kWh/month) or PLN 100/10kWh/year (about EUR 22.2/10kWh/year).

- Existing users automatically receive lifetime free subscriptions for believing in the program.

- There is a 14-day free subscription to test the program.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 33 · 2024-03-15T14:38:29Z

Peter answered · Mar 15 at 02:38 PM

A special promotion addressed to Installers to reward them for encouraging Consumers or Companies to purchase paid Services in the Program.

I encourage you to contact me on Messanger: https://www.messenger.com/t/1535517615

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 34 · 2024-03-15T16:43:00Z

gdhondt answered · Mar 15 at 04:43 PM

I can confirm. This software is good!

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 35 · 2024-03-15T19:34:38Z

Peter answered · Mar 15 at 07:34 PM

GbbOptimizer: https://gbboptimizer.gbbsoft.pl

Version 10.1

- Forecast: you can start animation of forecast from given time up to now

zrzut-ekranu-2024-03-15-202634.jpg (41.9 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 36 · 2024-03-16T19:39:46Z

Peter answered · Mar 16 at 07:39 PM

frantiseksobotka

> 2. DESS does not respect grid set point - eg. -200W in case of no import, no export

In our system you can setup GridSetpoint for every hour of day for export and default GridSetpoint when there is no export.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 37 · 2024-03-18T19:15:58Z

Peter answered · Mar 18 at 07:15 PM

In "Gain/Profits" module there is a lot of useful statistic information (per hour, per day or per month)

1710789316578.png (101.7 KiB)

1710789345807.png (58.7 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 38 · 2024-03-19T17:11:48Z

Peter answered · Mar 19 at 05:11 PM

Version 10.2 https://gbboptimizer.gbbsoft.pl

- Schedules: There is 'Fast Discharge' on 'Discharge Plans' and now we added 'Fast Charge' on 'Schedules' module.

zrzut-ekranu-2024-03-19-180436.jpg (46.1 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 39 · 2024-03-26T08:14:43Z

Peter answered · Mar 26 at 08:14 AM

FYI:

GbbOptimizer is using ESS, so it respects all setting and limits.

:-)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 40 · 2024-03-28T18:28:10Z

Peter answered · Mar 28 at 06:28 PM

Version 10.3 https://gbboptimizer.gbbsoft.pl

- Optimizer based on prices: Forcing MaxSOC during day can be calculated not only from midnight to sunrise, but also from midnight to given hour.

zrzut-ekranu-2024-03-28-190737.jpg (53.2 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 41 · 2024-04-03T10:42:38Z

Peter answered · Apr 03 at 10:42 AM

mheinze5722

> In short, that means, in my mind I have a "Default target SOC" each day that I aim to achieve. As I have LFP chemistry in my battery, I aim to charge to 100% every day. [If I had NMC chemistry, in summer, I could aim to only charge to 80% if that is easily enough to get me through the night for battery longevity].

In GbbOptimizer there is option to try to get MaxSCO (parameter) every day. This can be 80% or 100% or other value you setup in plant properties. :-)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 42 · 2024-04-05T09:40:30Z

Peter answered · Apr 05 at 09:40 AM

Version 10.4 https://gbboptimizer.gbbsoft.pl/

- Prices: Prices can be entered manually if they are missing from the official source or incorrect.

zrzut-ekranu-2024-04-05-112913.jpg (114.7 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 43 · 2024-04-08T18:37:33Z

Peter answered · Apr 08 at 06:37 PM

Version 11.0 https://gbboptimizer.gbbsoft.pl/

- Program has been translated to polish language

zrzut-ekranu-2024-04-08-202255.jpg (209.6 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 44 · 2024-04-09T10:29:53Z

Peter answered · Apr 09 at 10:29 AM

enyas

> I'm sorry having to confirm some of the often-mentioned issues and I turn off DESS for now.

So now time to try our program :-)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 45 · 2024-04-11T17:21:38Z

Peter answered · Apr 11 at 05:21 PM

Version 11.1 https://gbboptimizer.gbbsoft.pl/

- Communication with Deye inverter can now be V-based rather than SOC-based. Added ability to map SOC to V.

zrzut-ekranu-2024-04-11-175611-en.jpg (56.0 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 46 · 2024-04-12T13:36:59Z

Peter answered · Apr 12 at 01:36 PM

Version 11.2 https://gbboptimizer.gbbsoft.pl/

- New module: HP Forecast. The module allows you to forecast how many kWh the Heating Pump will consume depending on the temperature at a given hour.

zrzut-ekranu-2024-04-12-133300-en.jpg (132.5 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 47 · 2024-04-19T14:30:46Z

Peter answered · Apr 19 at 02:30 PM

Version 11.3 https://gbboptimizer.gbbsoft.pl/

- Import ExtraLoads from Tesla EV chargers Gen 3+

zrzut-ekranu-2024-04-19-162506-en.jpg (69.7 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 48 · 2024-04-22T17:48:44Z

Peter answered · Apr 22 at 05:48 PM

Version 11.4 https://gbboptimizer2.gbbsoft.pl/

- Import ExtraLoads (eg. EVCharge, HeatingPump, Other1/2) from HomeAssistant

zrzut-ekranu-2024-04-22-183403-en.jpg (95.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 49 · 2024-05-06T10:09:08Z

Peter answered · May 06 at 10:09 AM

Version 11.5 https://gbboptimizer.gbbsoft.pl/

- Victron: Real PV production can be imported from HomeAssistant instead of Victron System. This is good for MicroInverters not connected to Victron.

zrzut-ekranu-2024-05-06-100947-en.jpg (85.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 50 · 2024-05-13T14:07:49Z

Peter answered · May 13 at 02:07 PM

Version 11.6 https://gbboptimizer.gbbsoft.pl/

- Victron: Relay1 or Relay2 can be switch on if SOC is higher than given or/and SellingPrice is less than given.

zrzut-ekranu-2024-05-13-155429-en.jpg (111.0 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question

GbbOptimizer (a professional DESS alternative)

"Denmark

Related Resources

question details

Modifications Space

Node Red Space

question

GbbOptimizer (a professional DESS alternative)

"Denmark

Related Resources

question details

Related Questions

Modifications Space

Node Red Space