question

Bert Hennephof avatar image
Bert Hennephof asked

No data alarm - Communication monitoring

My EasySolar II GX suddenly came with the alarm "Communication monitoring" a few days ago. It also triggered an email with message "You are receiving this alarm notification because the VRM database has not received new data from this site since 2024-01-03 16:15:55 Europe/Paris." Looking further in remote console it shows "No data alarm - Communication monitoring".

I have not been able to find a solution (as most questions on this community board with related problem are not answered). After powering down the complete system and reboot it was working for a couple of hours and then the fault returned.

On one post I saw a discussion on wifi reliability vs cable, but as the other user I tried both. Besides it has been working for a year without a problem an suddenly the problem appears.

Looks like it appears when VRM was updated with funny Christmas an snow images.

How to debug this problem to solve permanently? (without having to remove the VRM install, clear all settings and reboot).

Thanks in advance.

EasySolar All-in-One
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

4 Answers
hwirth avatar image
hwirth answered ·

This may not be realy helpful, but I'm running an Easysolar on wifi and the communication is stable, as stable as wifi usually can be.

When it loses communication , will it reconnect by itself after some time? Mine is reconnecting after a few seconds, sometimes 2 minutes.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Bert Hennephof avatar image
Bert Hennephof answered ·

My Easysolar still has wifi connection as I can communicate with it (like going through menu's in remote console). But it seems that it doesn't update data to the portal anymore.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

hwirth avatar image hwirth commented ·
So it's still connected to your LAN but not to the internet. Check the internet connection of your other devices like computer or smartphone when the Easysolar reports that "no data alarm", just to exclude a bad internet connection.
0 Likes 0 ·
JohnC avatar image
JohnC answered ·

@Bert Hennephof

Usually a reboot of the GX will restore the VRM connection if it gets 'knotted'. This can be done automagically by settings. This is mine set for an hour's delay..1704335231899.png

If that doesn't work even when you know your www is up, then it's likely a local IP addressing issue. There may be some complexity involved with solving this, so familiarise yourself with what's described re that in the GX manual. If you still can't solve it, come back with more detail. There's occasional odd quirks I'm aware of, but reluctant to publish because I can't nail them down sufficiently.


1704335231899.png (39.5 KiB)
5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Bert Hennephof avatar image Bert Hennephof commented ·
Hi John, thanks for your advice.

I did toggle "reboot when no contact" to on now.

But I am still puzzled why it worked without this problem for a year and now it happened 2 times in a week.

Anyway, does it still record these issues in the error log with this setting "on"? Would be useful to see how often it occurs.

0 Likes 0 ·
Bert Hennephof avatar image Bert Hennephof Bert Hennephof commented ·
I can answer my last question myself: yes, it still records the error messages...

But it also means that the problem occurs frequently since a week.

So what is the cause of this failure (again: while it never happened the first year....)

0 Likes 0 ·
Show more comments
Bert Hennephof avatar image
Bert Hennephof answered ·

Now that my EasySolar II GX is working fine with an ethernet cable, I suspect that the wifi unit in the EasySolar is slowly dying. All other wifi in my network work fine. So I leave it cabled now.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

hwirth avatar image hwirth commented ·

One way to stay wireless would be a repeater with an Ethernet connection.


0 Likes 0 ·