This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello.
I have a Phoenix 24/25 charger.
Can I use it as a power supply?
I checked the datasheet and I saw "Can be used as power supply".
However, I didn't find anything in the manual about it.
I'm just interested in using it as a power supply for ToolkitRC M6D charger 500W.
Thank you.
Take a look into the VictronConnect app demo library, there you can go through all devices and settings.
Finally, I realized it.
In case someone is interested.
I did change the settings by using MK2 USB, created a new `battery type` as `Power Supply`, set 24V for absorption, and 24V for float, disabled "Storage" mode, and set the charge curve to Fixed.
Then connected Victron to Bluetti EB55 MPPT (12-28/8A) and everything worked perfectly. Not sure about reliability for the long term, but it works fine for a short time.
I think I will be able to charge the 2 Bluetti eb55 simultaneously or a single one in parallel mode (200W+200W) without an extra original charger. by using BATTERY1 + BATTERY2 outputs, or any other appliance.
Also, it will be useful for RC chargers like M6D.
