Hello,
If I combine two Inverter/Chargers, lets say Victron Multiplus - one on 220v 1600W and the other on 110v 1600w can I rely on 3200W power supply?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
If I combine two Inverter/Chargers, lets say Victron Multiplus - one on 220v 1600W and the other on 110v 1600w can I rely on 3200W power supply?
@Samaya You can not combine the output from a 120vand 230v inverter.
Very bad things will happen should you try this.
Even if you match the output voltages with a transformer
Very bad things will still happen.
Victron inverters can be paralleled only with specific programming and interconnected VE.Bus as well as specific interconnection cabling (both AC and DC). There's a manual for this.
But mixing a Victron with another inverter or even two Victrons that are not set up for parallel operation will be very bad.
Additional resources still need to be added for this topic
38 People are following this question.