Before we did our Victron install, our fifth wheel had Renogy solar equipment. We had a 50 amp Hughes Watch Dog with EPO, no autoformer, installed by the dealer prior to delivery. The dealer installed the WD on the shore power line prior to the transfer switch. The Victron installer initially left it that way, but the generator wouldn't come on line. We have the 3000 Multiplex II inverter. He stated this: "You have 2 forms of incoming power. Shore and generator. I have a feeling your watchdog got installed on the shore line and I used that for the inverter. This would cause the inverter to not see the generator. Watchdog should have been installed between ATS and panel." He moved the WD to after the ATS, and I believe, connected the WD to the inverter. My question is: will the system work, and will the generator come online, with the WD where they are usually installed, prior to the ATS ? At least that way the ATS will have some protection. Thank you.