My Victron Multiplus II is behaving strangely. I couldn't find the same behavior described in another post, so asking here.
It constantly switches back and forth between inverter mode and grid mode. Here is the pattern:
1. Switch to inverter mode - "Inverter" LED lights up
2. After 1 Minute, it switches to grid mode - "Mains" and "Bulk" LEDs light up
3. Immediately "Inverter LED" starts flashing
4. After 20-40 seconds, it changes back to inverter mode and it starts again with 1.
I believe some of the configuration settings may be wrong.
I have installed 3 Multiplus-II devices in 3 phases.
I am grateful for any hints or ideas which config settings could be causing this.