BMV 700 w/ blue tooth dongle installed into a 5th Wheel RV with 4 Wet cell 6V golf cart batteries wired series/parallel to a 2500w inverter/charger. When the inverter is turned off, the RV runs off the DC battery bank, when I need AC power the inverter is turned on and AC is throughout the entire RV. His first attempt resulted in moniter reading discharge from batteries only ( inverter off ) and no absorbson readings from shore power or when the inverter was on no discharge readings, second attempt resulted in discharge readings from inverter only, but when inverter was off no readings from the battery bank. Tech is now saying I possibly need another shunt ? The desired outcome is for the moniter to read my battery status from the 4 battery bank charging and discharging when using the batteries alone or when using the inverter is on. I dry camp alot and when I switch on the inverter to watch TV or wife uses a AC kitchen appliance the moniter keeps an accurate account of the battery status. When plugged into shore power or the generator the moniter can read absorption recharging the batteries and account for the difference.
The inverter is a brand new Xantrez Freedom 458 modified sine 2500w inverter/charger with automatic 30 amp transfer.
Little worried that the tech is going to damage my electricial system just changing things and hoping it will work? Any help is appreciated. I have searched for a wiring diagram for the 700 using 4 batteries and an inverter with no success.
Thanks
