This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
hi
my gen acts strangely it doesn't charge just compensate for current load +50-100W.
I didn't change anything since last winter, so its strange and not cost effective running a 3kw gen for 200W continuous load vrm: farm.png
any idea what could went wrong. vs off, no assistant, off-grid
Try disabling weak ac input
i tried every possible combination,no change. but now have 87W surplus from ☀ , any other ideas?
Any advice what generator to buy (most be avail in EU) which runs on LPG and has autostart from CerboGX ? 3kw min
Your system is under External Control. Your genset has been accepted by the Multiplus, but something else is holding it's production back. Perhaps a battery bms? Best find out what's going on there.
Your PV is also under Ext Control, and isn't doing much either. Yet your battery V is quite low.
Maybe try a reboot of your GX, then check all the settings there.
